Enterprise Resource Planning (ERP) solution
Published
Value
Description
Enterprise Resource Planning (ERP) System potentially including Manufacturing, Materials Movement, Warehousing, Order Management, Quality Management, Engineering, Asset Management, Finance and Human Resources sub-systems. The system will be required to operate in a regulated pharmaceutical environment and must conform to GxP compliance requirements including EudraLex Volume 4, EudraLex Volume 4 Annex 11, and US FDA 21 CFR parts 11, 210 and 211. The solution is required to be a cloud-based 'Software as a Service' solution, to include Consultation, Project Management, Implementation, Hosting, Service Support and upgrades and must include robust Disaster Recovery Planning and Business Continuity provisions. The system and all data must be hosted in the UK. Please note that this procurement opportunity has been cancelled. The procedure has been discontinued at SQ stage due to changes in business requirements and priorities. VMIC is in the process of considering its future requirements and will take any decision on any future procurement once this process has completed. Lot 1: The Vaccines Manufacturing and Innovation Centre (VMIC) is being established to promote, develop and accelerate the growth of the UK vaccine industry. This will be achieved through collaboration with the academic sector and subject matter experts which are rich in new vaccine technologies. VMIC provides expertise in process development and will provide manufacturing in the form of expert staff and a state-of-the-art manufacturing facility. VMIC will bridge the gap between research and expertise in development and manufacturing so that new vaccine products can enter clinical development. This is a value driver in terms of attracting funding for further development and partnering with the pharmaceutical industry for development to launch and manufacture vaccines. VMIC will also enhance UK preparedness and response capabilities for producing vaccines against emerging infectious diseases by allowing the UK government to use the facility and staff during an outbreak identified as a public health emergency of international concern. VMIC is a partner in the project to manufacture the Oxford Covid-19 vaccine. The programme has now reached the phase in which an ERP System needs to be procured and its deployment built into the plan. The compliance environment within which the organisation operates is governed by the following regulations which impose rigorous requirements on the organisation: 1) Eudralex Volume 4: Good Manufacturing Practice 2) Eudralex Volume 4 Good Manufacturing Practice: Annex 11 Computerised Systems 3) US FDA 21 CFR Part 11: Electronic Records & Electronic Signatures 4) US FDA 21 CFR Part 210: Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs 5) US FDA 21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals Given the prevailing circumstances VMIC must make every effort to bring online its manufacturing and support services at the earliest opportunity. To meet this goal the implementation of an ERP system is considered an urgent requirement. VMIC recognises that the service provider will be required to speedily provide robust solutions to its specific industry needs and anticipates a fully-managed configured off-the-shelf solution delivered with extensive support services based on industry knowledge and expertise, best in class project management and a low risk rapid implementation. The expectation of VMIC is that that the solution can be implemented using a staged modular approach. Initial licensing estimates will be based on 30 concurrent and 60 named user licenses. The form of contract will be based on the UK Government Mid-Tier model. The anticipated Term will be three years with an option to extend twice by 2 years on each occasion. Please note that this procurement opportunity has been cancelled. The procedure has been discontinued at SQ stage due to changes in business requirements and priorities. VMIC is in the process of considering its future requirements and will take any decision on any future procurement once this process has completed. Lot 1: The Vaccines Manufacturing and Innovation Centre (VMIC) is being established to promote, develop and accelerate the growth of the UK vaccine industry. This will be achieved through collaboration with the academic sector and subject matter experts which are rich in new vaccine technologies. VMIC provides expertise in process development and will provide manufacturing in the form of expert staff and a state-of-the-art manufacturing facility. VMIC will bridge the gap between research and expertise in development and manufacturing so that new vaccine products can enter clinical development. This is a value driver in terms of attracting funding for further development and partnering with the pharmaceutical industry for development to launch and manufacture vaccines. VMIC will also enhance UK preparedness and response capabilities for producing vaccines against emerging infectious diseases by allowing the UK government to use the facility and staff during an outbreak identified as a public health emergency of international concern. VMIC is a partner in the project to manufacture the Oxford Covid-19 vaccine. The programme has now reached the phase in which an ERP System needs to be procured and its deployment built into the plan. The compliance environment within which the organisation operates is governed by the following regulations which impose rigorous requirements on the organisation: 1) Eudralex Volume 4: Good Manufacturing Practice 2) Eudralex Volume 4 Good Manufacturing Practice: Annex 11 Computerised Systems 3) US FDA 21 CFR Part 11: Electronic Records & Electronic Signatures 4) US FDA 21 CFR Part 210: Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs 5) US FDA 21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals Given the prevailing circumstances VMIC must make every effort to bring online its manufacturing and support services at the earliest opportunity. To meet this goal the implementation of an ERP system is considered an urgent requirement. VMIC recognises that the service provider will be required to speedily provide robust solutions to its specific industry needs and anticipates a fully-managed configured off-the-shelf solution delivered with extensive support services based on industry knowledge and expertise, best in class project management and a low risk rapid implementation. The expectation of VMIC is that that the solution can be implemented using a staged modular approach. Initial licensing estimates will be based on 30 concurrent and 60 named user licenses. The form of contract will be based on the UK Government Mid-Tier model. The anticipated Term will be three years with an option to extend twice by 2 years on each occasion. Please note that this procurement opportunity has been cancelled. The procedure has been discontinued at SQ stage due to changes in business requirements and priorities. VMIC is in the process of considering its future requirements and will take any decision on any future procurement once this process has completed.
Timeline
Publish date
3 years ago
Close date
3 years ago
Buyer information
Vaccine Manufacturing and Innovation Centre UK Ltd
- Contact:
- Chris Peterson
- Email:
- erptender@vmicuk.com
Explore contracts and tenders relating to Vaccine Manufacturing and Innovation Centre UK Ltd
Go to buyer profileNotice topics
Source
"Find-a-Tender"To save this opportunity, sign up to Stotles for free.
Save in appTender tracking
Access a feed of government opportunities tailored to you, in one view. Receive email alerts and integrate with your CRM to stay up-to-date.
Proactive prospecting
Get ahead of competitors by reaching out to key decision-makers within buying organisations directly.
360° account briefings
Create in-depth briefings on buyer organisations based on their historical & upcoming procurement activity.
Collaboration tools
Streamline sales workflows with team collaboration and communication features, and integrate with your favourite sales tools.
Explore similar tenders and contracts
Browse open tenders, recent contract awards and upcoming contract expiries that match similar CPV codes.
- Openclosing
Department of Finance - Integr8 Programme - Integr8 Delivery Partner
Department of Finance150,000,000 GBPPublished today
- Openclosing
ICT Hardware & Associated Services Framework
Nottinghamshire County Council13,500,000 GBPPublished 4 days ago
- Openclosing
Enquiry Control and Utility Asset Management System
firmus energy (Distribution) Ltd500,000 GBPPublished 4 days ago
- Openclosing
ICT Hardware & Associated Services Framework
Nottinghamshire County CouncilPublished 4 days ago
- Openclosing
ICT Hardware & Associated Services Framework
Nottinghamshire County CouncilPublished 4 days ago
- Openclosing
GoJ-IE-T Branchage and Internal Areas 2024 - 2029
Government of JerseyPublished 11 days ago
- Openclosing
Multi-Functional Devices, Print Management Software and Public Printing
East Riding of Yorkshire1 GBPPublished 14 days ago
- Openclosing
Multi-Functional Devices, Print Management Software and Public Printing
East Riding of YorkshirePublished 14 days ago
Explore other contracts published by Vaccine Manufacturing and Innovation Centre UK Ltd
Explore more open tenders, recent contract awards and upcoming contract expiries published by Vaccine Manufacturing and Innovation Centre UK Ltd.
- Closed
Enterprise Resource Planning (ERP) system (for manufacturing, materials movement & warehousing, quality management, engineering & asset management, Finance and Human Resources)
Vaccine Manufacturing and Innovation Centre UK LtdPublished 3 years ago
- Closed
Computer-related services
Vaccine Manufacturing and Innovation Centre UK LtdPublished 3 years ago
- Closed
Semi-automatic Inspection Unit
Vaccine Manufacturing and Innovation Centre UK LtdPublished 4 years ago
- Closed
Industrial process control equipment
Vaccine Manufacturing and Innovation Centre UK LtdPublished 4 years ago
- Closed
Computer-related services
Vaccine Manufacturing and Innovation Centre UK LtdPublished 4 years ago
- Closed
Computer-related services
Vaccine Manufacturing and Innovation Centre UK LtdPublished 4 years ago
- Closed
Industrial process control equipment
Vaccine Manufacturing and Innovation Centre UK LtdPublished 5 years ago
- Closed
Construction consultancy services
Vaccine Manufacturing and Innovation Centre UK LtdPublished 5 years ago
- Closed
Architectural, construction, engineering and inspection services
Vaccine Manufacturing and Innovation Centre UK Ltd5,000,000 GBPPublished 5 years ago
Explore more suppliers to Vaccine Manufacturing and Innovation Centre UK Ltd
Sign upExplore top buyers for public sector contracts
Discover open tenders, contract awards and upcoming contract expiries of thousands of public sector buyers below. Gain insights into their procurement activity, historical purchasing trends and more.
- Dartford Borough Council
- APUC Ltd
- The Royal Parks
- Tyne Coast College
- Sea Fisheries Protection Authority
- Dwr Cymru Cyfyngedig
- NHS England and NHS Improvement South East
- Cumbria Housing Partners
- Welsh Government Commercial Delivery
- St Angela's Ursuline School
- Lincoln Christ's Hospital School
- Seaham Town Council
- Watford Rural Parish Council
- Raglan Primary School
Explore top sources for public sector contracts
Stotles aggregates public sector contract data from every major procurement data source. We ingest this data and surface the most relevant insights for our users. Explore our list of public sector procurement data sources below.